Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: 73 Johnson 115 question

73 Johnson 115 question 14 years 2 months ago #439

  • MarkS
  • MarkS's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Posts: 5348
  • Karma: 118
  • Thank you received: 5
Does anybody know if you need to unhook a wire or anything when running a compression check on a 115ESL73M Johnson? Seems like I remember something about unhooking a wire to prevent burning up something electronic, but I may be confusing this with running a motor without the wiring harness hooked up????? Getting old and feeble minded sucks, I mean stinks, sorry!

The JEGO site seems to be malfunctioning.

Mark

Please Log in or Create an account to join the conversation.

Mark

Re:73 Johnson 115 question 14 years 2 months ago #1016

I normaly leave the ign switch off and use a hand held bump start switch,most auto zone-napa-etc stores carry them, also I allways remove all spark plugs. this eleminates excess drag on the starter and any possible cross comtamination from other cyls bleeding through a burnt headgasket.

Please Log in or Create an account to join the conversation.

Re:73 Johnson 115 question 14 years 1 month ago #1816

run a jumper to ground from the black / yellow stripe wire at the powerpack. That would be the same as having the ignition turned OFF.

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Time to create page: 0.173 seconds

Donate

Please consider supporting our efforts.

FG Login

Glassified Ads

FiberGoogle

Who's Online

We have 8121 guests and 2 members online