TOPIC: Seal transom screws

Seal transom screws 7 years 5 months ago #128365

Tjcr Offline Fresh Boarder Posts: 39 Karma: 1 Thank you received: 0	A prior post recommended sealing transom screws with 5200 sealant. Do you recommend removing screws,covering with sealant and replace or just sealing top area of screws without removal. Thanks TR Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

davnau6345 Offline Expert Boarder Posts: 376 Karma: 41 Thank you received: 12	I've removed the screws, dipped the tips into the opening of the 5200 tube to get some on, then screwed them back where they came from. Wipe off any excess. Can take up to a week to completely cure. Done! Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. Dave Nau - 1966 MFG Niagara with 1963 Mercury 350 (35hp) outboard and 1966 Tee Nee trailer. Second boat is a 1962 MFG Edinboro with a 1984 Evinrude 70hp and Holsclaw trailer.