TOPIC: Power trim transom clamp interchange

Power trim transom clamp interchange 12 years 11 months ago #72854

PSUrandy Topic Author Offline Fresh Boarder Posts: 43 Karma: 1 Thank you received: 0	I have what I believe is a mid 80s 60HP oil injected motor with the self contained power trim/tilt system. Would I be able to remove the transom clamp trim assembly and install it on my `80 115? Thanks! Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

tim_c Offline Junior Boarder Posts: 87 Karma: 11 Thank you received: 0	If what you have is a 60 hp 3 cyl then no it won't work. You need to use the swivel assembly for the integral trim setup & on those 60s it's much smaller. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

PSUrandy Topic Author Offline Fresh Boarder Posts: 43 Karma: 1 Thank you received: 0	Yes, its a 3 cylinder motor. Do only 6 cylinder setups fit? I assume the V6 setup is different as well? Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.