Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: Need older mercury trim ram cylinder

Need older mercury trim ram cylinder 9 years 3 weeks ago #123087

Hoping one of you fellows has an extra ram cylinder you could part with for a reasonable amount. Recently replaced the hydraulic line on the starboard side. During which time I noticed that the cylinder was previously damaged where the line threads in,and was repaired with in weld. I shopped around locally and couldn't find a replacement. Joe from Ferguson Poole marine could get me a new one , but the price was out of my budget. I ended up re rigging it the way it had been previously. It didn't leak, but won't raise the motor , even after tons of bleeding efforts. I reinspected and noticed the line was set slightly off in the cylinder housing. So I have attempted to re do it,for now but would like to replace with a non damaged unit. If it doesn't work this time, I may swap rams with the port side, then it will only be the down action to worry about, gravity should help with that. Thanks for help.

Please Log in or Create an account to join the conversation.

Re:Need older mercury trim ram cylinder 9 years 3 weeks ago #123110

I can dig out a used one for you.
doc F

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Time to create page: 0.043 seconds

Donate

Please consider supporting our efforts.

Glassified Ads

1984 Switzercraft 20SC
( / Boats)

noimage
07-02-2025

1969 Mercury 1250
( / Engines)

1969 Mercury 1250
06-23-2025

1959 Delaney Powercat Catamaran Vintage Full Restoration 14'
( / Boats)

1959 Delaney Powercat Catamaran Vintage Full Restoration 14'
06-23-2025

FG Login

FiberGoogle

Who's Online

We have 10894 guests and no members online