TOPIC: ned help with motor placement

ned help with motor placement 13 years 11 months ago #62710

Tbergh Offline Junior Boarder Posts: 102 Karma: 1 Thank you received: 0	need help as i would lik to mount a 12hp buccaner on my 1052 viking but the cavitation plate is about 3/4 to 1 inch above the bottom of the boat is it okay to run like that thanks thad Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:ned help with motor placement 13 years 11 months ago #62723

MarkS
Offline
Moderator
Posts: 5348
Karma: 118
Thank you received: 5

I'm not familiar with either of your components of the setup Thad, some pics might help. Generally speaking, you should be fine with the AV plate an inch above the keel. As long as the water pickup (for cooling) stays completely under (in) the water while underway, and the prop doesn't ventilate (blow out) I don't believe it will be a problem.

Good to see you back, haven't been around in a while. What have you been up to?