|
Welcome,
Guest
|
TOPIC: Edge Molding Needed
Edge Molding Needed 8 years 3 months ago #133530
|
Gentlemen:
I need about 40' of this molding. It's from a vintage Switzer Craft. I've "rounded up the usual suspects" but can't find it anywhere. Any/all leads would be appreciated. At this point, anything close would do. 
|
|
|
Please Log in or Create an account to join the conversation.
Website: NautilusRestorations.com
Mentor to the unenlightened! "Never allow logic to interfere with a boat purchase." - J. S. Hadley "Vintage quality beats new junk every time." - J. S. Hadley "Anything supposed to do two things does both of them half-assed." - J. S. Hadley "Success makes... |
Edge Molding Needed 8 years 3 months ago #133532
|
|
|
Please Log in or Create an account to join the conversation. |
Edge Molding Needed 8 years 3 months ago #133534
|
its wefcorubber.com
they say if they dont have it, they can make it. |
|
Please Log in or Create an account to join the conversation. |
Edge Molding Needed 8 years 3 months ago #133536
|
What I need is rub rail, not windshield molding. It runs along the seam between the topsides and the hull. I'll contact Wefco Rubber and see what they say.
|
|
|
Please Log in or Create an account to join the conversation.
Website: NautilusRestorations.com
Mentor to the unenlightened! "Never allow logic to interfere with a boat purchase." - J. S. Hadley "Vintage quality beats new junk every time." - J. S. Hadley "Anything supposed to do two things does both of them half-assed." - J. S. Hadley "Success makes... |
Moderators: kensikora, classicfins, bruce gerard, billr, mrusson, cc1000, MarkS, Waterwings, Nautilus, jbcurt00
Time to create page: 0.084 seconds
Donate
Please consider supporting our efforts.
Glassified Ads
Flying Scott 60 |
FOR SALE : YAMAHA 300 HP 4 STROKE( / Boats)
10-02-2025
1964 Aristo-Craft Funliner( / Boats)
09-12-2025
FG Login
FiberGoogle
Who's Online
We have 6560 guests and 2 members online