TOPIC: Fiberglass hull repair

Fiberglass hull repair 15 years 3 months ago #11948

pipestone65 Offline Fresh Boarder Posts: 1 Thank you received: 0	After 50 summers on the lake, someday the fiberglass hull of my 1965 Pipestone is surely going to need repair. What should I know about finding someone who can do those repairs -- in Iowa. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re: Fiberglass hull repair 15 years 3 months ago #11953

Peter_Crowl Offline Contributing Member Posts: 489 Karma: 14 Thank you received: 0	Ask boat shops for referrals. Ask marina owners for referrals. Get referrals from prospective service techs. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Fiberglass hull repair 15 years 3 months ago #11954

JetDeville700 Offline Platinum Boarder Posts: 3271 Karma: 38 Thank you received: 3	Also, check out AOMCI ( www.aomci.org/events/ ) and ACBS ( www.acbs.org/eventcalendar.html ) events near you and just ask some regular dudes! Frank Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Fiberglass hull repair 15 years 3 months ago #11991

Silverghost Offline Junior Boarder Posts: 56 Karma: 3 Thank you received: 0	Put it on a trailer and take it to Heather! Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Fiberglass hull repair 15 years 3 months ago #11999

MarkS
Offline
Moderator
Posts: 5348
Karma: 118
Thank you received: 5

There are good shops in Cedar Rapids and Des Moines, what part of Iowa are you located in? (You can always "Google" fiberglass boat repair and find someone close, but I would sure use the previously described methods of finding someone first. If you do have to take it somewhere you don't know, I'd ask for references from satisfied customers or examples of their work.)