TOPIC: Thermostat replacement

Thermostat replacement 13 years 3 months ago #70901

aznative14
Offline
Contributing Member
Posts: 256
Karma: 8
Thank you received: 0

I have spend hours trying to find the OMC part number for a thermostat that fits a '63 Johnson 40 HP. Kind of small, pin on the moving part of valve cradles into a small bar on top of unit. Hope to get one before this weekend. If not, I assume the motor could run without one. Just runs a bit cold, as the temp will only be mid 40's. Water temp around 60

Please Log in or Create an account to join the conversation.

Re:Thermostat replacement 13 years 3 months ago #70904

Waterwings Offline Contributing Member Posts: 4898 Karma: 107 Thank you received: 100	Did you check marineengine.com? Bob Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Thermostat replacement 13 years 3 months ago #70913

ed-mc Offline Platinum Boarder Posts: 1461 Karma: 235 Thank you received: 128	Try this, looks like the Merc equivalent is cheaper: www.marineengine.com/newparts/part_search.php?part_num=18-3543&x=17&y=5 HTH........ed Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Thermostat replacement 13 years 3 months ago #70919

aznative14 Offline Contributing Member Posts: 256 Karma: 8 Thank you received: 0	No, none of the ones I found in the usual sites are the same. Very small, small spring. with a post from the valve in a v piece across the top. Trying to describe. Will try to take a pic, and make measurements Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.