TOPIC: Part Needed

Part Needed 10 years 2 weeks ago #128246

raweber21
Offline
Fresh Boarder
Posts: 1
Thank you received: 0

Hello,
I am currently restoring a Glasspar Sport Lido. It has a 1958 evinrude lark 35hp on it. The motor starts great and would run very well but I need a new carburetor float. Since they have not been manufactured in a while for that motor, I am having trouble finding one. Does anyone know where I can get one or have one they'd be willing to sell?

Please Log in or Create an account to join the conversation.

Re: Part Needed 10 years 2 weeks ago #128248

jbcurt00 Offline Moderator Posts: 738 Karma: 51 Thank you received: 16	Try outting an ad in the AOMCI free ads. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Part Needed 10 years 2 weeks ago #128249

vintagerunner Offline Expert Boarder Posts: 267 Karma: 18 Thank you received: 1	if this the correct one its still available here? www.marineengine.com/parts/johnson-evinrude-parts.php?year=1958&hp=35&model=25035&manufacturer=Evinrude§ion=Carburetor Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Part Needed 10 years 1 week ago #128252

the savage ii Offline Expert Boarder Posts: 398 Karma: 24 Thank you received: 0	Shields Marina, St. Marks, Florida has all these NOS parts, or most of them. I bought a Carb. float for my 1960 40hp Johnson there and he had more. Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. Jim Savage

Re:Part Needed 10 years 1 week ago #128342

59Larsonplayboy
Offline
Fresh Boarder
Posts: 15
Thank you received: 0

Marineengine.com should have what your looking for. Put in your year and model number on their site and it should pull up diagrams and all for the entire motor. I have a 59' Evinrude 35hp Lark and their site still has listings for I would say 90% of every part, engine wise. Instead of buying each and every part from there though; I found an entire carb rebuild kit for mine including float, needle and seat and all gaskets on ebay brand new for $28. Hope this helps.