'66 Aristo Craft Funliner

'66 Aristo Craft Funliner 11 years 1 month ago #108716

pirate4life
Topic Author
Offline
Fresh Boarder
Posts: 8
Karma: 1
Thank you received: 0

I am restoring my '66 Aristo Craft Funliner. Just got her back from the paint shop and I am putting her back together. Question...The rub rail is original and in decent shape (Lots of dents and some corrosion).Should I try to keep the original rub rail or go with new? I have investigated a TACO white semi-rigid rub rail with a chrome insert. Any suggestions?

Attachments:

Please Log in or Create an account to join the conversation.

Re:'66 Aristo Craft Funliner 11 years 1 month ago #108729

oldboatmotors Offline Fresh Boarder Posts: 15 Karma: 2 Thank you received: 0	I think i would try and stay with the original rub rail or try and find something as close to original as possible. I'd like to hear some more about your restoration. Any pics of the progress as you went along? I have 2 Funliners, 61 and 66. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'66 Aristo Craft Funliner 11 years 1 month ago #108887

Jim L
Offline
Platinum Boarder
Posts: 1426
Karma: 60
Thank you received: 2

My suggestion would be to use the original aluminum rubrail if the dents could be sanded and buffed out without changing the shape too much. If the dents are too deep,maybe a new rail of similar size would be the ticket. IMHO, these boats too small for the bigger rubrails How wide and thick is the taco rail you speak of.

Please Log in or Create an account to join the conversation.

Re:'66 Aristo Craft Funliner 11 years 1 month ago #108890

frog Offline Platinum Boarder Posts: 1431 Karma: 59 Thank you received: 3	pirate, you boat looks great, and you should be able to find rub rail that is close to original. keep looking. and nice job. frog Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Thanks for the feedback... 11 years 1 month ago #108893

pirate4life
Topic Author
Offline
Fresh Boarder
Posts: 8
Karma: 1
Thank you received: 0

Thanks for the tips. I have decided to use the original rub rail for the time being while I continue researching a replacement. With new screws and bolts, it will not be too difficult to work with in the future.

Does anyone know a good source for a replacement windshield? Mine has a split and I would really like to replace it. I have seen a post on this site that shows a guy building one out of Lexan. Any thoughts?

Please Log in or Create an account to join the conversation.

Re:'66 Aristo Craft Funliner 11 years 1 month ago #108894

pirate4life
Topic Author
Offline
Fresh Boarder
Posts: 8
Karma: 1
Thank you received: 0

Thanks for the tips. I have decided to use the original rub rail for the time being while I continue researching a replacement. With new screws and bolts, it will not be too difficult to work with in the future.

Does anyone know a good source for a replacement windshield? Mine has a split and I would really like to replace it. I have seen a post on this site that shows a guy building one out of Lexan. Any thoughts?

Please Log in or Create an account to join the conversation.

Re:'66 Aristo Craft Funliner 11 years 1 month ago #108895

pirate4life Topic Author Offline Fresh Boarder Posts: 8 Karma: 1 Thank you received: 0	Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'66 Aristo Craft Funliner 11 years 1 month ago #108904

Jim L
Offline
Platinum Boarder
Posts: 1426
Karma: 60
Thank you received: 2

The windshield would be tough to make. There is one for sale on C/L. NOT Cheap,and the shipping will be murder,but they're very hard to find.I ended up buying one in Napierville, Ill and having it shipped to NC. Not Cheap,but I had looked for decades. detroit.craigslist.org/mcb/bpo/4888420428.html

Please Log in or Create an account to join the conversation.

Re:'66 Aristo Craft Funliner 11 years 1 month ago #108908

NJTriton
Offline
Contributing Member
Posts: 289
Karma: 12
Thank you received: 0

As Jim said, they are very hard to come by. I've also searched for about 5 years now and have had no luck, other than driving 6 states over to get a whole boat. My windsheild has the normal cracks in the corners on both sides, they've been drilled and filled to stop it from cracking anymore but you can still see it.

Please Log in or Create an account to join the conversation.

-Brian

Re:Thanks for the feedback... 11 years 1 month ago #108920

MarkS
Offline
Moderator
Posts: 5348
Karma: 118
Thank you received: 5

Have you got the windshield frame? If so it's not hard to make one out of plexi or polycarbonate. No frame makes it a little tougher, I think Dave (CC1000) still has some complete windshield assy's for sale, might check with him on sizes.

Edit: Merged back into original post - Funliner is a different ballgame altogether. They guys who know have given the best advice.

Please Log in or Create an account to join the conversation.

Mark

Re:'66 Aristo Craft Funliner 11 years 1 month ago #108932

whatsleft
Offline
Expert Boarder
Posts: 282
Karma: 17
Thank you received: 1

I have an extra frame if need - basically a backup for mine, which I will probably try to sell again over the next month or so as it looks like i will never get to it.

Not sure how i would ship it though. It is 2 parts as I recall, the main frame, and them a piece along the bottom. I'd have to check to see if i have both...

Please Log in or Create an account to join the conversation.

Re:'66 Aristo Craft Funliner 11 years 1 month ago #108952

vuyosevich Offline Contributing Member Posts: 2910 Karma: 76 Thank you received: 2	dave (cc1000) has a bunch of nos windshields , but their for customcrafts and mfg boats. i'd imagine that they could be retrofitted to fit a similar size boat. ron Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'66 Aristo Craft Funliner 11 years 1 month ago #108961

Jim L
Offline
Platinum Boarder
Posts: 1426
Karma: 60
Thank you received: 2

NJTriton wrote:

As Jim said, they are very hard to come by. I've also searched for about 5 years now and have had no luck, other than driving 6 states over to get a whole boat. My windsheild has the normal cracks in the corners on both sides, they've been drilled and filled to stop it from cracking anymore but you can still see it.

Not to change the subject,but I have to say I'm really liking your profile pic,Brian. That blue looks great!!

Please Log in or Create an account to join the conversation.

Re:'66 Aristo Craft Funliner 11 years 1 month ago #109002

NJTriton Offline Contributing Member Posts: 289 Karma: 12 Thank you received: 0	Thanks Jim! New wiring Is all done, new throttle cables, just waiting on the upholstery shop to get done with the cushions then she's going in the water Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. -Brian

TOPIC: '66 Aristo Craft Funliner