Difference between revisions of "Valco"

From Classic Boat Library
Jump to: navigation, search
Line 15: Line 15:
  
  
In 1957, George Gregory was vice-president and general manager of Valley Aluminum (see 1957 article below). This may be the George W. Gregory who founded [http://www.gregorboats.com/ Gregor Boats] which is still in business and producing welded aluminum boats. Valco was known for its riveted aluminum boats.
+
In 1957, George Gregory was vice-president and general manager of Valley Aluminum (see 1957 article below). This may be the George W. Gregory who founded [http://www.gregorboats.com/ Gregor Boats] in 1964 and is still in business and producing welded aluminum boats. Valco was known for its riveted aluminum boats.
  
  

Revision as of 01:50, 27 November 2012

Valcologo57.jpg


Additional History Needed. Please contact us to edit or contribute to this page.


Valco Boats

Division of Valley Aluminum Co.

5733 E. Shields Ave.

Fresno, California


In 1957, George Gregory was vice-president and general manager of Valley Aluminum (see 1957 article below). This may be the George W. Gregory who founded Gregor Boats in 1964 and is still in business and producing welded aluminum boats. Valco was known for its riveted aluminum boats.


Valco also produced jet-propelled fireboats with one in service with the Monterey, California Fire Department starting in 1962. Rudder magazine detailed the Valco fireboats in the January 1964 issue. The magazine reported the Valco Boat was powered with a 215 HP Interceptor engine with a fire pump mounted ahead of the engine, the propulsion jet pump behind the engine. The boat could pump water to put out fires and move as needed. This allowed the boat to maintain position. Buehler Turbocraft advertised a similar fireboat.


Model Information


1957 Information


1957 Information


Valco Boats in Use


Back to Main Page