TOPIC: Does anyone have experience with C-Flex?

Does anyone have experience with C-Flex? 12 years 2 months ago #57138

deanlofall
Topic Author
Offline
Contributing Member
Posts: 427
Karma: 49
Thank you received: 0

I am about to start some custom fiberglass work on a '70s Marlin flat-bottom speed boat. We are going to build a cool, removable rear deck over the open cockpit. After giving the idea of creating a skin with 1/8" ply then forming some detail with foam board... I came across C-Flex, a reinforced fiberglass "board", 0.08 or 0.125" thick. Its normally used for one-off fiberglass construction.

seemanncomposites.com/index.php?option=com_content&view=article&id=11&Itemid=11

www.glen-l.com/methods/mthdfg31.html

Anyway, I am wondering if anyone has experience with it, and might have anything you could share?

Dean

Please Log in or Create an account to join the conversation.

Bandit - 1959 Glasspar G3
See more G3s at www.g3owners.com

Re:Does anyone have experience with C-Flex? 12 years 2 months ago #57205

Ike Offline Expert Boarder Posts: 480 Karma: 22 Thank you received: 14	I have no direct experience with C-Flex but have seen boats built of it and with parts made of it. It is used basically the same way plywood is, but is more expensive. Of course it has advantages that ply doesn't, such as it doesn't rot. You need to look at the cost/benefit comparison Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. Peter D. Eikenberry newboatbuilders.com "Don't tell me that I can't. tell me how I can."