Difference between revisions of "Marlin"

From Classic Boat Library
Jump to: navigation, search
(moved page content to Marlin (Florida) and created disambigation page)
 
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
Logo Needed. Please contact us to contribute to or edit this page.
+
''Marlin Boats'' was a brand used by at least three unique manufacturers:
  
Marlin Fiberglass Boat Co.
 
  
Boca Raton, FL
+
* [[Marlin (California)|Jefferies Boats Inc.]], a builder of custom and semi-custom boats in Venice, California.
  
A little history as written by William Vilda's 1963 Marlin while writing his boat story.
 
  
There is a message on the forums showing his boat located here:  http://www.fiberglassics.com/glassic-forums/main-forum/boat-stories
+
* [[Marlin (Florida)|Marlin Fiberglass Boat Co., Inc.]], a fiberglass boat-builder based in Boca Raton, Florida in the 1950's and early 1960's.
  
  
The photos, taken in 2006, show my 1963 Marlin 15 foot fiberglass boat. The boat is quite special to me, since I built it in 1963 , with guidance and help from my dear dad. The boat is all original, including the hardware . Only the upholstery was redone, in 1973. The boat has it's original gel coat colors, and has never been painted. The motor is the original one I put on the boat, and is a 1960 Evinrude 40 hp. Lark . We bought the motor used for $200, and it had only a few hours on it and looked almost new. The Rocket trailer was purchased in 1973, and I added the Evinrude 2 hp. kicker motor in 1974.
+
* [[Marlin (Oregon)|Marlin Boats Inc.]], a fiberglass boat-builder active in the 1970s White City, Oregon.
  
  
Marlin Boat Company got its start in late 1957 when [[Lake N Sea|Chris Craft Lake 'n Sea]] sold their assets. (Chris Craft had purchased the Lake 'n Sea Company only a year earlier.) Most of the boat molds went to the Parsons Corp. of Traverse City, Michigan. However, a few of the molds stayed behind in Boca Raton, Florida (where Lake 'n Sea had begun in 1956) and were acquired by the Marlin Boat Company. Starting in 1958, Marlin began producing a line of boats in the Boca Raton plant, and in a second plant in the 800 block of N.E. 30th. Street, in Ft. Lauderdale, FL.
+
[[Main Page|Back to Main Page]]
  
 +
[[Category:Disambiguation]]
  
My dad's own cabinet making and custom boat building shop was next door to the Marlin facility in Ft. Lauderdale, and as a youngster I used to watch the Marlins being made. Marlin produced the 15 foot boat and a 17 or 18 foot version in Ft. Lauderdale, as well as some catamarans at their Boca Raton plant. The Ft. Lauderdale facility, possibly a subcontractor to Marlin, was owned by Mr. Byron Bristol, a talented boat designer and commercial artist. Mr. Bristol redesigned the upper deck half of the 15 foot Lake 'n Sea molds , and chose to smooth out the deck in front of the windshield, and enlarge the fins. The fins were modified so that they now started about halfway down the length of the boat, are rounded on top, and sweep continuously back to slightly past the transom. (The Parsons Company did their own redesign of the deck and the transom, and chose a more ornate aircraft inspired theme for some of their Parsons Lake ' n Sea boats.)
 
Marlin made no modifications to the hull section of the original Lake 'n Sea.
 
  
 
+
{{disambig}}
The Marlins were manufactured from 1958 until late 1961 or early 1962 . In early summer of 1963, my dad and I bought a set of boat molds from the Boca Raton warehouse of the now defunct Marlin company. A fire had damaged most of the molds, so we chose the best ones. I spent the next two months repairing, patching, and hand polishing those molds, until I could comb my hair in the reflection. I can vividly recall the big, jet black, glistening molds with their sweeping compound curves, ready to become the mother of my boat. It was an awesome and soul stirring sight!
 
 
 
We finished building my boat in August of 1963, just a week before my 15th. birthday. We launched the boat into Middle River, a half mile from my dad's shop. Since then, I've put many miles on the boat and motor, from Key West to the Chesapeake Bay, and I enjoy it now as much as ever!
 
 
 
 
 
'''1959 Stuff'''
 
<gallery>
 
File:BHBPHOTO29.JPG | 1959 Marlin Sportsman Overnighter
 
File:BHBPHOTO31.JPG | 1959 Marlin Sportsman Overnighter
 
File:BHBPHOTO44.JPG | 1959 Marlin Sportsman Overnighter
 
File:BHBPHOTO45.JPG | 1959 Marlin Sportsman Overnighter
 
File:BHBPHOTO46.JPG | 1959 Marlin Scat-Cat Overnighter
 
File:BHBPHOTO30.JPG | 1959 Marlin Scat-Cat Overnighter
 
</gallery>
 
 
 
 
 
[[Main_Page|Back to Main Page]]
 
 
 
[[Category:Florida]]
 
[[Category:Fiberglass]]
 
[[Category:Catamarans]]
 
[[Category:Fins]]
 

Latest revision as of 16:38, 15 November 2015

Marlin Boats was a brand used by at least three unique manufacturers:




  • Marlin Boats Inc., a fiberglass boat-builder active in the 1970s White City, Oregon.


Back to Main Page


(Click on the blue text to be redirected to each manufacturer's page).




This is a disambiguation page.


Disambiguation pages are created when two or more brands by otherwise unrelated manufacturers happen to share the same name such as in the case of Dolphin Fiberglass Boats by West Coast Fiberglass Co. of Costa Mesa California and Dolphin Aluminum Boats by Barnes Boat Co. of Rockville, Connecticut.


Other times, a disambiguation page may be created when two related manufacturers have the same brand, but are best located on separate pages such as in the case of Thompson Bros. Boat Mfg. Co. and Thompson Boat Co. of New York, Inc.. This may be done so as to make clear the difference between two otherwise similar brands or to better organize large amounts of information such as brochure images.


If you have noticed a case where a disambiguation may be warranted, please contact us so that we may create a better and more organized Classic Boat Library.