Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: Early 60's 900 w/mid 80's power trim and tilt unit

Early 60's 900 w/mid 80's power trim and tilt unit 14 years 2 weeks ago #2521

  • 240sxguy
  • 240sxguy's Avatar Topic Author
  • Offline
  • Fresh Boarder
  • Fresh Boarder
  • Posts: 33
  • Karma: 1
  • Thank you received: 0
IT FITS!

I am not 100% sure exactly why but everything bolted up using the lower isolators from the newer motor. merc # 75299

For the doubters;





Special thanks to Dr. Frankenmerc for doing the initial investigation and encouraging me to do this!

Can of worms is cracked open, upper gasket set is en-route and I am basically going to do a re-seal job on this motor. Plus the mariner trim unit is obviously grey and needs some black paint.

Evan

Please Log in or Create an account to join the conversation.

Re:Early 60's 900 w/mid 80's power trim and tilt unit 14 years 2 weeks ago #2532

  • g3jim
  • g3jim's Avatar
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Posts: 1009
  • Karma: -27
  • Thank you received: 0
NICE!!!!!!! I am going to try and do the same thing with my 1350 and a 1150

Please Log in or Create an account to join the conversation.

Re:Early 60's 900 w/mid 80's power trim and tilt unit 14 years 2 weeks ago #2534

  • 240sxguy
  • 240sxguy's Avatar Topic Author
  • Offline
  • Fresh Boarder
  • Fresh Boarder
  • Posts: 33
  • Karma: 1
  • Thank you received: 0
Jim, I am crossing my fingers that the bushings that I have are not some sort of fluke. If you do order them, take a look at the end and see if the bolt hole is off center. If it appears to be perfectly centered then it *may* not work.

Dr. frankemerc had a thread about this that is now in the archives that I was posting in that has more good info on the topic.

Thanks again for the phone call yesterday, I am happy to know that this motor will be done right and be reliable.

Evan

Please Log in or Create an account to join the conversation.

Re:Early 60's 900 w/mid 80's power trim and tilt unit 14 years 2 weeks ago #2536

I know it is early, and my eyes are still blurry, but is that an OMC PT/T unit? It sure looks like one.
Inquiring minds what to know.

lar

Please Log in or Create an account to join the conversation.

Re:Early 60's 900 w/mid 80's power trim and tilt unit 14 years 2 weeks ago #2538

  • 240sxguy
  • 240sxguy's Avatar Topic Author
  • Offline
  • Fresh Boarder
  • Fresh Boarder
  • Posts: 33
  • Karma: 1
  • Thank you received: 0
lar, that trim and tilt unit is from a mid 80s (I think) mariner 1xx horsepower tower of power.

I have the serial number from the original motor if someone cares to look it up.

Evan

Please Log in or Create an account to join the conversation.

Re:Early 60's 900 w/mid 80's power trim and tilt unit 14 years 1 week ago #2693

  • 63g3
  • Offline
  • Contributing Member
  • Contributing Member
  • Posts: 464
  • Karma: 62
  • Thank you received: 2
Thats a later 60's like 65 or 66 Merc 90 based on decals. The trouble is with the 64 and older inline 6's matching up.
Randy

Please Log in or Create an account to join the conversation.

Re:Early 60's 900 w/mid 80's power trim and tilt unit 14 years 1 week ago #2700

  • 240sxguy
  • 240sxguy's Avatar Topic Author
  • Offline
  • Fresh Boarder
  • Fresh Boarder
  • Posts: 33
  • Karma: 1
  • Thank you received: 0
63g3 wrote:

Thats a later 60's like 65 or 66 Merc 90 based on decals. The trouble is with the 64 and older inline 6's matching up.
Randy


Randy, it didn't fit without using the other isolators. Everything fit just like Dr. frankenmerc's photos that are in the archives. Off by 3/16 or so.

Evan

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Time to create page: 0.196 seconds

Donate

Please consider supporting our efforts.

FG Login

Glassified Ads

1975 16ft Cobalt
( / Boats)

1975 16ft Cobalt
03-27-2024

Homelie/Bearcat
( / Engines)

noimage
03-17-2024

Thunderbird Apache 1956 hardtop
( / Boats)

noimage
03-10-2024

FiberGoogle

Who's Online

We have 6475 guests and one member online