Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: Need parts for 59 G3

Need parts for 59 G3 2 years 8 months ago #109566

  • DaveZ
  • DaveZ's Avatar Topic Author
  • Offline
  • Fresh Boarder
  • Fresh Boarder
  • Posts: 4
  • Thank you received: 0
I'm restoring a 1959 G3 that I bought this spring and need the following parts:
-Motor well tub. My motor well was altered to accommodate a 20" aluminum 'home-made' transom (tub no longer wraps over the transom)and may not be worth saving. I'm restoring to the original short shaft configuration.
-Bright extrusions on each side of the tub and across the top of the transom.
-Both grab handles on the deck
-'V'-shaped bow trim piece
-Both G3 star side emblems

Thanks, DaveZ

Please Log in to join the conversation.

Re:Need parts for 59 G3 2 years 8 months ago #109572

I could probably help you out. I am trashing a split cockpit G3 after I take the usable parts off. Some I need and some I don't. Where are you located? I am in Ely, MN a stone's throw from Canada.
You can email me directly @ foxes.8899@gmail dot com. I can get some pictures later of what you are looking for.
-Lonnie

Please Log in to join the conversation.

Re:Need parts for 59 G3 2 years 8 months ago #109703

DaveZ, I have a complete 59 G3 hull with all the hardware you need. You can have it for free if you want to come pick it up.

Please Log in to join the conversation.

Re:Need parts for 59 G3 2 years 8 months ago #109716

  • DaveZ
  • DaveZ's Avatar Topic Author
  • Offline
  • Fresh Boarder
  • Fresh Boarder
  • Posts: 4
  • Thank you received: 0
finfanatic, I'm near Portland, OR. Where are you?

DaveZ

Please Log in to join the conversation.

Re:Need parts for 59 G3 2 years 8 months ago #109721

Unfortunately I'm a long way away from you, I'm in Northeast Tennessee, on the border of Virginia. But if you were ever to find yourself in this area you'd be more than welcome to take the boat.

Please Log in to join the conversation.

Re:Need parts for 59 G3 2 years 8 months ago #109722

Actually if you want I can just take off the parts you need and send them to you. I could also cut the transom out for you but cost of shipping might be high on that. Just give me a shout at This email address is being protected from spambots. You need JavaScript enabled to view it. when you get a chance.

Please Log in to join the conversation.

  • Page:
  • 1
Time to create page: 0.120 seconds

FG Login

Donate

Please consider supporting our efforts.

Glassified Ads

titles in hand
( / Boats)

titles in hand
01-06-2018

FiberGoogle

Quick Search

Who's Online

We have 3595 guests and 10 members online